100V Reel To Reel Plating Electroplating Rectifiers Pulse Reverse Power Supplies

Characteristic values

Switch mode technology

Single or Dual output available

Linearity inaccuracy < 1 % (related to nominal DC value)

Ripple less than < 1 % (related to nominal DC value)

Complex waveforms

Constant current regulation (voltage regulation on request)

SPI interface for control unit pe8005

Fast rise and fall times (rectangular waveforms)

Permanent short circuit and open circuit proof

Microprocessor controlled regulation

Mains supply: standard 3x380 V - 460 V +/- 10 % / 50-60 Hz (other voltage on request)

Max. effective output power: 1x 6360 Watts or 2x 3180 Watts

For Example

Operation / programming (via external pe8005 control unit)

Large illuminated 5,7“ graphic display
5 x 4 keypad for easy handling and navigation

Clear and user friendly menu navigation via well structured pull down menus

Easy generation of complex waveforms with up to 16 individual steps with 2 individual amplitudes (Ix1 and Ix2 as well as tx1 and tx2), that can be positive or negative

MMC/SD card reader for software update, import / export of device configuration, set values and storing of bus-logging data

Synchronization function
2 programmable output relays

Ah-totalizer, dosage counter, timer
Programmable START ramp
Parameters individually adjustable even during operation

Display

Clear display of actual values

Graphic view of the set value shape, actual values shown in oscilloscope- mode

Status, warning and error indication

Resolution

0 up to +/- xx.xA for Ix1 and Ix2; resolution: 100mA
0 up to 9 999.9mSec for tx1 and tx2; resolution: 0,1mSec Cycles (repeatings per step): 1 - 99